
SV302 Retractable Power Distributor
Schuko
CEE
CEE coupling
Equipment SV302-1-3:
• 4 x Schuko
Equipment SV302-2-3:
• 1 x CEE 5/16A 400V/6h
Equipment SV302-3-3:
• 1 x CEE 5/32A 400V/6h
Equipment SV302-4-3:
• 3 x socket • 1x CEE adapter 16A
Dimensions: 280 x 234 x 280 mm (W x H x D)
Floor installation depth: 229 mm
Supply line: 1 x lateral M25 x 1,5 mm, 2 x below Ø 25 mm
Retractable power distributor SV302 for outdoor use, made of saltwater-resistant aluminum. The retractable power distributor SV302 is accessible by car, of course, only when the lid is fully closed. The standard surface is natural aluminum. As standard, the distributor is equipped with 4 SCHUKO sockets with VDE test mark. The housing is watertight when closed, protection class IP67. Further assembly variants on request.
To close:
The retractable power distributor is turned anti-clockwise using the special key and then pressed down until it fully engages in the seal. The end position is audible with a "flop". In the lower position, the lowering distributor no longer has to be twisted.
To open:
The lowering distributor is pulled up using the special key and then turned clockwise. This is how it stays in place when open.
Square Frame
| Number of slots | 1, 4 |
|---|---|
| Design | square, cylindrical |
| Installation | Under floor |
| Field of application | Indoor and outdoor |
| Colour | Aluminum nature |
| Load capacity | Passable by truck |
| Height adjustment | Not levelable |
| Material | Aluminum |
| Surface | anodized |
| Protection class | IP67 |
| Substrate | Stone, Concrete, Asphalt |
Downloads
Article number: SV302Category: Retractable Power DistributorTags: floor coverings not insertable, resistant to salt water, waterproof, retractable, lockable with tools
